Ubiquiti UniFi nanoHD Compact Access Point *** 5-pack ***
- Four-Stream 802.11ac Wave 2 Technology
- Supports 200+ Concurrent Users
- 802.3af PoE Compatibility
- Works with UniFi Network Controller
- Manage Your Networks from a Single Control Plane
- Intuitive and Robust Configuration, Control and Monitoring
- Remote Firmware Upgrade
- Guest Portal/Hotspot Support
- Free Expedited Shipping for most order over $299
- Industry Leading Warranties + Expedited Exchanges
- Hassle-Free 30-Day Money-Back Guarantee
- Unlimited US-Based Technical Support
Features, Description, Reviews, Q&A, Specs & Installation
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility. NOTE: PoE injector is not included for 5 Packs.
Low-Profile Mounting The UniFi nanoHD AP’s low?profile ceiling mount (sold separately) allows you to seamlessly integrate the AP into its environment.
Compact Form Factor The compact design delivers a cost-effective combination of value and performance.
LED The unique LED provisioning ring provides administrator location tracking and alerts for each device.
Power over Ethernet (PoE) Standard The UniFi nanoHD AP can be powered by an 802.3af PoE compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch (sold separately). The UniFi nanoHD AP is compatible with all UniFi PoE Switches and 48V adapters.
Superior Processing Power The UniFi nanoHD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.
Scalable Enterprise Wi-Fi Management
UniFi® is the revolutionary Wi-Fi system that combines enterprise performance, unlimited scalability, and a central management controller. UniFi 802.11AC Dual?Radio Access Points (APs) have a refined industrial design and can be easily installed using the included mounting hardware.
Easily accessible through any standard web browser and the UniFi mobile app (iOS or Android), the UniFi Controller software is a powerful software engine ideal for high?density client deployments requiring low latency and high up-time performance.
Use the UniFi Controller software to quickly configure and administer an enterprise Wi-Fi network – no special training required. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.
Save Money and Save Time
Unlike traditional enterprise Wi-Fi systems that use a hardware controller, UniFi comes bundled with a non-dedicated software controller that can be deployed on an on-site PC, Mac, or Linux machine; in a private cloud; or using a public cloud service.
The UniFi 802.11AC Dual-Radio APs feature the latest in Wi-Fi 802.11AC MIMO technology.
Intuitive UniFi Controller Software
Configure and manage your APs with the easy-to-learn user interface.
Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a three?pack) and expand to thousands while maintaining a single unified management system.
Extend Your Coverage
With the UniFi Controller software running in a NOC or in the cloud, administrators can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers.
Initial 802.11ac Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier-generation AP, such as the UniFi AC Pro AP, to communicate with only one client at a time.
802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi nanoHD AP, to communicate with multiple clients at the same time – significantly increasing multiuser throughput and overall user experience.
The following describes a 5-client scenario:
MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
- four 1x1 clients
- two 2x2 clients
- one 2x2 client and two 1x1 clients
- one 3x3 client and one 1x1 client
A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.
Real-World Performance The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP.
Client Compatibility For optimal performance, use MU?MIMO clients. SU?MIMO clients will also benefit and gain up to 10-20% greater performance when used with the UniFi nanoHD AP.
For high-density environments, such as a theater where there are numerous clients in a relatively small space, we recommend the UniFi nanoHD AP when a minimal footprint is also required.
Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels. When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation.
When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.
With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi nanoHD AP can support more than triple the number of users2 than a typical Wave 1 AP.
|Operating Temperature (F)||14° - 158°|
|Operating Humidity||5 ~ 95 % (non-condensing)|
|Mounting Bracket Included||No|
|Certification||FCC, IC, CE, RoHS|
|Dimensions||6.30" x 6.30" x 1.29"|
|Power Supply Included||No|
|Power (w)||10.5W max; UniFi Switch PoE|
|Frequency (GHz)||2.4 + 5GHz|
|File Name||File Size||File Type|
IP Camera Bandwidth Calculator: Calculate bandwidth or system load for optimal performance of your network IP security.
Covert Compare Tool: Watch our sample videos to see which hidden covert cameras work best for your covert application.
Compare IR & Low Light Tech: See the difference between standard, super low lux, and IR CCTV security cameras.
Compare Lens FOVs: This handy FOV calculator will help you in determining which lens is right for your application.
Compare Video Frame Rates: Use this tool to compare video frame rate settings on video security DVR products.
DVR Storage Calculator: Determine how much storage you will need for your security DVR.
Lens FOV Calculator: Choose from multiple scenarios and focal lengths to find the lens will work for your application.
NVR Storage Calculator: Determine how much storage you will need for your NVR.
System ROI Calculator: Determine your potential losses without a Video Security System and how much you can save.
Voltage Drop Calculator: Calculates the final voltage for each cable gauge.
Volts/Watts/Amps Converter: Calculates either the volts, watts or amps if two of the values are known.