With the ALI-NZ60 Series Mini IP Cameras, the sensor and the base station come separately, but are connected by a 26′ cable, allowing you the flexibility you need when setting up a covert surveillance solution. Cameras are available in a range of form factors so you may choose one that fits your specific needs.
This base station offers triple streams with a video bit rate of 32Kbps~16Mbps. It also supports MPEG and H.264 video compression that encompasses the baseline, main, and high profiles.
Built-in Micro SD/SDHC/SDXC card slot provides storage up to 128GB.
With this covert solution, you can obtain audio as well in the following bit rate with its corresponding compression:
This base station is compatible with the following:
NOTE: Must use this Base Station with a compatible ALI-NZ60 Series camera. The 26’ connecting cable comes with the camera.
Protection and Warranty:
This product is protected by a 30-day money-back guarantee, unlimited US-based technical support, and 3-Year Warranty that covers your entire purchase, with no asterisks and no exceptions!
|Storage Capacity (GB)||Up to 128 (micro SD card not included)|
|Video Offload||SD Card|
|Video Offload Type 2||Network|
|Dimensions||3.07” × 4.13” × 1.26”|
|Card Reader Type||SD / SDHC / SDXC card slot, up to 128gb|
|Operating Humidity||Humidity 95% or less (non-condensing)|
|Operating Temperature (F)||-22° ~ 140°|
|Power Supply Included||Yes|
|Power Consumption (watts)||6.5|
|Lens FOV Calculator||Choose from multiple scenarios and focal lengths to find the lens will work for your application.|
|Compare Lens FOVs||This handy FOV calculator will help you in determining which lens is right for your application.|
|Compare IR & Low Light Tech.||See the difference between standard, super low lux, and IR CCTV security cameras.|
|Compare Covert Cameras||Watch our sample videos to see which hidden covert cameras work best for your covert application.|
|Voltage Drop Calculator||Calculates the final voltage for each cable gauge.|
|Volts/Watts/Amps Converter||Calculates either the volts, watts or amps if two of the values are known.|