The infinias Intelli-M Single Door Add Kit with HID Prox Reader includes needed door hardware and accessories to add a single door to your network and deliver an effective, easy to install IP-based access control solution. The single door kit includes an infinias Ethernet-enabled single door controller, HID prox reader, mounting box, plus other needed accessories, so you can add a door to your network and get started with your IP-based access control solution quickly and easily. Great for retrofit installations when existing door and locking hardware is not required.
What’s Included:
IP-based access control is ideal for a wide variety of environments including:
Key Features:
infinias eIDC32 Intelli-M Ethernet-enabled Integrated Door Controller
The infinias eIDC32 Intelli-M Ethernet-enabled Integrated Door Controller, may be small in size, but this little device delivers the power needed to secure your doors – from a single door installation to thousands of doors at multiple locations around the world. The eIDC32-Intelli-M door controller provides true scalability with the ability to add as many doors as needed to your network, by simply adding one controller per door. You can add as many doors as you need—from a single door to thousands.
Component | Quantity |
---|---|
S-EIDC32 | 1 |
S-SMB-5075 | 1 |
A-CRS-6005-GRY | 1 |
General Specifications | |
---|---|
Readers | 2 |
Doors | 1 |
Cards | 8,000 in Web Mode* 5,000 with Supervisor Plus* 30,000 with Intelli-M Access* |
History | 16,000 transactions (web mode) |
Schedules | 240 |
Holidays | 48 |
Encryption | AES (Advanced Encryption Standard) 128-bit Encryption |
Alarm | Yes |
Tamper Sensor | integrated infrared tamper |
Inputs | Configurable inputs, contact closure or transistor-transistor logic (TTL), with optional end of line resistor (EOLR) supervision |
Outputs | 2 x Open collector outputs with electronic overload protection (max 450 mA at 12 VDC)* 1 x Form C, SPDT relay output with configurable initial state (max 5 A at 30 VDC) 1 x Built-in warning buzzer or alarm tone generator (max 80 dB)" |
Physical Specifications | |
Dimensions (H" x W" x D") | eIDC32: 1.30" D x 1.70" W x 2.82" H 3.30 x 4.32 x 7.16 cm Enclosure: 2.84" D x 4.30" W x 4.30" H 7.20 x 10.90 x 10.90 cm Plaster Ring: 0.48" D x 4.75" W x 4.75" H 1.20 x 12.10 x 12.10 cm Cover Plate: 0.48" D x 4.75" W x 4.75" H 1.20 x 12.10 x 12.10 cm |
Operating Temperature (F) | 32° to 120°F (0° to 49°C) |
Operating Humidity | 0% to 85% |
Outdoor | No |
Unit Weight (oz) | 3.7 oz (105 g) |
Product Color | Black |
Networking Specifications | |
Communication | Ethernet, 10Base-T |
Max Distance | 100 m (328 ft) |
Switch | Cat 5, Cat 5e, Cat 6 |
Power Specifications | |
PoE | Yes |
Volts DC | 24 |
Amps | 1 amp |
Other | |
Certifications | CE, Class A FCC part 15, Class A |
Physical Characteristics | |
---|---|
Depth (in/cm) | 1.625" / 4.1 |
Height (in/cm) | 4.75" / 12.0 |
Width (in/cm) | 4.75" / 12.0 |
Card / Reader | |
---|---|
Reader Type | mini-mullion |
Frequency | 125 kHz |
Read Range | 1.0" ~ 3.0" |
Card Compatibility | 125 kHz |
Card Size (# bits) | up to 84 bits |
Physical Specifications | |
Construction | Polycarbonate UL 94 |
H" x W" x D" | 3.13 x 1.7 x 0.66 |
Mounting | mullion |
Termination | Terminal |
Cable Distance | 500 ft (150 m) 22 AWG |
Operating Temperature (F) | -22F to 150F -30C to 65C |
Operating Humidity | 0-95% |
Outdoor | Yes |
Unit Weight (oz) | 2.7 oz |
Product Color | Gray |
Power Specifications | |
Volts (DC) | 5-16 VDC |
Amps DC (mA) | 30 ~ 75 |
Warranty | |
Warranty (years) | Lifetime |
Certifications | UL294, FCC, EU, CB, SRD, EMC, CE, C-Tick |
File Name | File Size | File Type |
---|---|---|
Controller Manual | 2153 KB | |
Reader Installation Guide | 93 KB | |
Data Sheet | 374 KB | |
Access Quickstart Guide | 1386 KB | |
Intelli-M Access V4.0 Software Manual | 6097 KB | |
Supervisor Plus Quickstart Guide | 604 KB | |
Supervisor Plus Software Manual | 10234 KB | |
Access System Aids | 9115 KB | ZIP |
Supervisor Plus System How To | 5593 KB | ZIP |
Voltage Drop Calculator | Calculates the final voltage for each cable gauge. |
---|---|
Volts/Watts/Amps Converter | Calculates either the volts, watts or amps if two of the values are known. |