Key Features

Micron 3D TLC NAND Flash

Form factor: 9-pad Secure Digital (SD) memory card

• SD Physical Layer Specification version 5.10 compliant
• SD memory card file system specification
• SD memory card security specification
• Secure digital music initiative (SDMI)-compliant
• Supports secure digital interface (SD) and serial peripheral interface (SPI)
• Copyright protection for recordable media (CPRM)
• Exterior mechanical write-protect switch

Endurance: 2K program erase cycles

Performance

• Refer to Performance and Capacity (page 5) for read and write speed

Bus speed mode (theoretical transfer rate @x4 bits)

• Default: 3.3V signaling up to 12.5 MB/s @25 MHz
• High-speed: 3.3V signaling up to 25 MB/s @50 MHz
• SDR12: UHS-I 1.8V signaling up to 12.5 MB/s @25 MHz
• SDR25: UHS-I 1.8V signaling up to 25 MB/s @50 MHz
• SDR50: UHS-I 1.8V signaling up to 50 MB/s @100 MHz
• SDR104: UHS-I 1.8V signaling up to 104 MB/s @208 MHz
• DDR50: UHS-I 1.8V signaling up to 50 MB/s @50 MHz (sampled on both clock edges)

Integrated power-on reset, oscillator, voltage regulation, and voltage detection circuits

Built-In features for defect and error management

• Strong error correction code implemented
• Global wear leveling
• Bad block management
• Refresh mechanism for UECC prevention
• Sudden power off (SPO) protection

Form factor

• Standard SD (24mm x 32mm x 2.1mm)

Standards compliance

• RoHS
• FCC
• CE
• BSMI
• KC RAA
• E.E.E.
• VCCI
• IC

Halogen-free